Pain point 1: Safety: The basketball hoop is over 4 meters high and can easily collapse and injure people Hurting video. ② Insufficient weight distribution: The box is small and the weight distribution is not standard. The safety weight distribution standard is 500 kilograms, and we provide a weight distribution of no less than 500 kilograms per unit
Solution: ① The box can release a 500kg counterweight ② Z-shaped parts are fixed, more firmly ③ Other companies use iron plates to seal the bottom of the box, but the iron plates inside the box are relatively thin and prone to rusting
Pain point 2: Rust and corrosion of connecting bolts
Solution: ① Hot dip galvanized or 304 stainless steel ② The best choice for other manufacturers is to use cold galvanizing or Dacromet
Pain point 3: The bottom of the box is close to the ground because rainwater and soil are prone to corrosion
Solution: Use cast steel feet to distinguish them from other small square tubes
Pain point 4: Rich zinc and low powder
Solution: Two layer spraying, the first layer of zinc rich low powder is equivalent to anti rust paint, used for corrosion prevention. The second layer is anti fading and anti-aging flour
Pain Point 5: Basket (99% of outdoor basketball hoops are rusted)
resolvent:
① Our assembly line is a stacking type, and the time can be set according to the thickness of the steel. Our basket is set at 90 minutes and 200 degrees. The longer the time, the less likely it is to rust, and the shorter the time, the more likely it is to rust
② FIBA products are made of special materials that do not deform or bend, with a cast steel structure inside and adjustable strength. They are the same as the Spalding basketball hoop
Pain point 6: Protective cover
Solution: The sheath thickness should be 10CM, and the sheath thickness for professional competitions should not be less than 10CM. (Other people's protective covers are not FIBA certified, and the thickness of the cover is generally around 3CM.) Wooden board+hard sponge+soft sponge+PU surface layer
7. Rebound (we are FIBA products with backing film), the rebounding of the basketball league has explosion-proof film, with a transparency of 95%, thicker rubber strip material, and fully coated with glue
8. Nets (strong load-bearing capacity, standard size, and resistance to the ball)
9. The electric cylinder lifting has no hydraulic oil, and there is a risk of tipping over due to pressure loss, without contaminating the floor. The oil circuit is prone to blockage and cannot be raised or lowered, requiring no maintenance.